Previous Client Restoration Projects.

Georgian Bow-Front Drawers (after)

How it arrived; badly damaged with structural pieces missing.

What did I do? Fitted new structural pieces including; front drawer dividers, carved a new front foot, replaced missing veneer, replaced missing handles, stained and re-finished.

The result; a beautifully restored chest of drawers.

Georgian Bow-Front Drawers (during repairs)

See opposite.

Middle Eastern Inlaid Table (after)

How it arrived; in reasonable condition although many pieces were missing.

What did I do? Replaced missing pieces of bone, mother of pearl and abalone to the top and lower sections.

The result; A repaired tilt-top coffee table.

Middle Eastern Inlaid Table (before)

See opposite

Scalloped Dining Table (after)

How it arrived; the top was stained and the original finish was worn in areas.

What did I do? Carefully removed the original finish and applied a more modern durable finish.

The result; A restored table from the “Mousey Thompson” stable.

Scalloped Dining Table (before)

See opposite

Ercol Studio Couch (after)

How it arrived; split arms, loose doweling, perished webbing.

What did I do? Replaced all the webbing, re-fitted loose dowels, cleaned & glued split arms, stripped the whole frame and applied new finish.

The result; A fully restored mid-century couch.

Ercol Studio Couch (before)

See opposite

Kitchen Larder Cupboard (after)

 

What did I do? Stripped off the many various layers of paint, removed prep board and stripped, replaced glass in upper doors, replaced all handles and applied clear wax finish inside and out.

The result; A fully restored early 20th century cupboard.

Kitchen Larder Cupboard (before)

How it arrived; slide out preparation tray stuck, glass broken in upper door, drawers don’t open/close, remove 40 years of various different paints.

 

 

Arts & Crafts Burr Wood Table (after)

How it arrived; overall condition was good with only some of the decorative edging either broken or missing.

What did I do? Because there was no likelihood of me finding exact replacement parts I fitted similar style edging pieces, traced the original pattern and hand carved the pattern to match. Then I applied a matching stain and a couple of coats of protective finish.

The result; an occasional table looking its best again.

Arts & Crafts Burr Wood Table (before)

See opposite

Brodrene Ollendorf (after)

How it arrived; Structurally sound but this chair had been over-stained in a dark oak finish which was not period correct and the original covering had been replaced.

What did I do? Stripped the chair back to bare wood and then applied a number of layers of finish to produce a more representative original look. I later completed some research on this chair and found another in the National Museum of Norway. This furniture was ONLY produced as Bespoke pieces for wealthy clients in Norway back in the early 20th century.

The result; A chair which is on its way to being fully restored.

Brodrene Ollendorf (before)

See opposite.

Information icon

We need your consent to load the translations

We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.