19th Nov 2026

Antique Furniture Restoration.

The UK and the world in general has certainly benefited from the expert craftsmanship of cabinet/furniture makers from the Elizabethan period of (1558 - 1603) to the Edwardian period of ( 1901 - 1910) but the one thing all these different styles and time periods have in common is the quality of work and materials.

On this page are a variation of time periods from the 17th to 20th century. All different in styles and design and yet and more importantly, they all work with any environment.

So, if you have an Antique piece within your household and you’re thinking of replacing it with a more modern flatpack version “click” the button below and let’s look at what Evoke Bespoke can do to change your mind?

18th Century Chest of Drawers.

One of the first pieces which came into the workshop a few years ago. The client wanted its dull scratched exterior stripped back and re-finished.

Before

As you can see there’s little to no depth or sheen to this piece after all the years of use.

At this point you need to ascertain wood type, structural integrity, potential issues and your plan of action.

During

The top of the chest is solid wood, the drawers were veneered and the side panels were recessed plywood.

So I hand stripped the top and sides and then sanded back to bare wood whereas, the recessed side panels and drawer fronts I stripped with fine wire wool and a mix of wet stripper, remembering that veneer is very thin so I certainly didn’t want it damaged and then a light sanding.

After

Once the chest was completely sanded the wood was sealed and sanded before final finishes were applied to provide protection and add that depth of sheen back to how it would have looked when first manufactured.

Art Deco Metamorphic Tea Table.

Circa 1930’s, is this fabulous tea trolley which I purchased as a learning process for how I was approaching the tasks.

 Before

Oak frame with oak ply and steel operational runners.

First of all the operating mechanism didn’t work and the wood was badly stained.

I took a number of photographs of the mechanism so it could be taken apart, cleaned and replaced.

During

For the woodwork I used a mix of oil, whitespirit and methylated spirts to strip off the original finish.

The spirits remove the finish whereas the oil nourishes the wood as you go.

After

All completed with a final coat of oil and then waxed.

Information icon

We need your consent to load the translations

We use a third-party service to translate the website content that may collect data about your activity. Please review the details in the privacy policy and accept the service to view the translations.